• Cleaning Tips •
Cleaning + Disinfecting Joints | Easy as 1-2-3! | 99% Natural
Introduction
Joints are an important part of the tiling in
kitchens, bathrooms and other spaces. Unfortunately, grout lines quickly become dirty and can become a breeding ground for bacteria and dirt. The build-up of soap scum, mold and other unwanted dirt can lead to an unhygienic environment. It is important to clean regularly, not only for a fresh look, but also to prevent the spread of bacteria.
There are different methods to clean joints. The most efficient way is to make the joints shine with a steam cleaner. The steam cleaner not only removes stubborn dirt, but also disinfects the entire surface. And all this without the use of harmful chemicals, making it not only effective, but also environmentally friendly. In addition, the hot steam is ideal for cleaning cement joints and restoring dark joints.
Cleaning joints with a steam cleaner
-
Remove dust
First remove dirt and dust by rinsing the windows or gently wiping them with a
cloth
.
-
Steam Cleaner Preparation
Fill the steam cleaner's water tank almost to the brim, but always leave a little bit of room to allow for more efficient steam production.
-
Window Puller Accessories
Attach the window squeegee accessories to the steam cleaner, which is specially designed for cleaning windows, mirrors and even
shower cubicles
-
Window Cleaning
Place the steam cleaner on the window and then move the window squeegee attachments in a figure eight motion over the surface. This distributes the steam evenly and effectively removes dirt and stains.
-
Eco-friendly cleaning
Steam cleaner is environmentally friendly, it only requires water, without harmful chemicals. This is healthier for you and better for the environment. If you still want a fresh scent, you can use the 100%
natural fragrance
l from CleanKoala.
-
Window Frames with Mold and Bacteria
Direct the steam cleaner at window frames that are affected by mold and bacteria. The heat from the steam helps kill bacteria and mold spores. Then wipe off the loosened dirt with a cloth.
-
Stubborn Stains
For tough stains, simply hold the steam cleaner on the spot for a few seconds to loosen them. Then use the squeegee to wipe the stain away. Repeat a few times if necessary.
-
Dry with a cloth
Finish the process by wiping the cleaned windows dry with a clean, dry cloth. This will ensure a streak-free result and give the windows a glossy finish.
1: Preparation:
Make sure the joints are free of dirt and dust. Remove any large particles with a cloth before using the steam cleaner.
2: Prepare the Steam Cleaner
Fill the steam cleaner's water tank almost to the brim, but always leave a little bit of room to allow for more efficient steam production.
3: Choose the right attachment
Choose the right attachment that is specifically suited for joints. First use the steam outlet attachment and then remove the stubborn dirt with the corner attachment.
4: Applying steam
Press the steam button and move slowly over the grout, including yellow grout in the bathroom and grout on the
toilet floor. Let the steam work on each section for a few seconds to loosen dirt.
5: Remove Dirt:
Use the brush attachment or the corner attachment to remove loosened dirt from the joints, especially on ceramic tiles. The steam makes it easier to remove dirt.
6: Wipe
Remove loose dirt and other particles with a clean cloth. Wipe the cleaned joints to obtain a fresh result.
7: Drying
Allow the cleaned joints to dry completely before reusing the space. This way you can enjoy clean, bacteria-free joints in your kitchen, bathroom or other tiled spaces.
8: Natural fragrance (optional):
Do you want a pleasant fresh scent in your home in addition to a cleaner floor? Then add a specially developed, Add 100% natural fragrance from CleanKoala to the water of the steam cleaner.
Tips for cleaning joints:
Baking Soda:
Baking soda, also known as bicarbonate of soda, is a powerful cleaning agent. Make a paste of baking soda and water and apply it to the grout. Let it sit for a while and then scrub with a toothbrush or brush. Rinse thoroughly with water. Baking soda helps remove dirt and stains, leaving the grout looking fresh again.
Lemon juice:
Lemon juice is known for its natural cleaning properties and pleasant scent. Squeeze fresh lemons and apply the juice directly to the grout. Let it sit for a while before rinsing it off. The natural acids in lemon juice help dissolve limescale and dirt, making the grout clearer.
Vinegar:
Vinegar is a powerful descaler and cleaner. Mix equal parts white vinegar and water and apply to the grout. Let it sit for a while and then scrub with a brush. Rinse thoroughly with water. Vinegar helps to remove limescale, mold and bacteria, and makes the grout shine again.
Now that you're already busy
Frequently Asked Questions
If your question is not listed here, please feel free to contact our team.
We advise you to clean it regularly, for example once a month. This prevents the build-up of dirt, mold and bacteria. In humid areas such as kitchens and bathrooms, cleaning may be necessary more often, even weekly.