• Cleaning Tips •
Clean windows without streaks with a steam cleaner + 5 tips
Introduction
Cleaning your windows without streaks can sometimes be a real challenge. There are different methods, from the traditional approach to modern technologies.
Our recommendation? Use a steam cleaner. Why? The powerful steam not only cleans the windows, but also disinfects them and removes bacteria, all without the use of chemical cleaning agents.
The result is shiny windows and an environmentally friendly cleaning method. In addition to regular windows, you can also clean plastic windows with a steam cleaner.
In this article, we’ll take you step-by-step through the process of cleaning windows with a steam cleaner, including helpful tips on how to do it as efficiently as possible. We’ll also explore other methods so you can choose the approach that works best for you.
Cleaning with a steam cleaner
1. Remove dust
First remove dirt and dust by rinsing the windows or wiping them gently with a cloth.
2. Prepare the steam cleaner
Fill the steam cleaner's water tank almost to the brim, but always leave a little bit of room to allow for more efficient steam production.
3. Window Squeegee Accessories
Attach the window squeegee accessories to the steam cleaner, which is specially designed for cleaning windows, mirrors and even shower cubicles.
4. Cleaning Windows
Place the steam cleaner on the window and then move the window squeegee attachments in a figure eight motion over the surface. This distributes the steam evenly and effectively removes dirt and stains.
5. Eco-friendly Cleaning
Steam cleaner is environmentally friendly, it only requires water, without harmful chemicals. This is healthier for you and better for the environment. If you still want a fresh scent, you can use the 100% natural fragrance from CleanKoala.
6. Frames with Mold and Bacteria
Direct the steam cleaner at window frames that are affected by mold and bacteria. The heat from the steam helps kill bacteria and mold spores. Then wipe off the loosened dirt with a cloth.
7.Stubborn Stains
For tough stains, simply hold the steam cleaner on the spot for a few seconds to loosen them. Then use the squeegee to wipe the stain away. Repeat a few times if necessary.
8. Dry with a cloth
Finish the process by wiping the cleaned windows dry with a clean, dry cloth. This will ensure a streak-free result and give the windows a glossy finish.
-
Remove dust
First remove dirt and dust by rinsing the windows or gently wiping them with a
cloth
.
-
Steam Cleaner Preparation
Fill the steam cleaner's water tank almost to the brim, but always leave a little bit of room to allow for more efficient steam production.
-
Window Puller Accessories
Attach the window squeegee accessories to the steam cleaner, which is specially designed for cleaning windows, mirrors and even
shower cubicles
-
Window Cleaning
Place the steam cleaner on the window and then move the window squeegee attachments in a figure eight motion over the surface. This distributes the steam evenly and effectively removes dirt and stains.
-
Eco-friendly cleaning
Steam cleaner is environmentally friendly, it only requires water, without harmful chemicals. This is healthier for you and better for the environment. If you still want a fresh scent, you can use the 100%
natural fragrance
l from CleanKoala.
-
Window Frames with Mold and Bacteria
Direct the steam cleaner at window frames that are affected by mold and bacteria. The heat from the steam helps kill bacteria and mold spores. Then wipe off the loosened dirt with a cloth.
-
Stubborn Stains
For tough stains, simply hold the steam cleaner on the spot for a few seconds to loosen them. Then use the squeegee to wipe the stain away. Repeat a few times if necessary.
-
Dry with a cloth
Finish the process by wiping the cleaned windows dry with a clean, dry cloth. This will ensure a streak-free result and give the windows a glossy finish.
Cleaning with sponge
To clean your windows with a sponge, start by filling a bucket with water and adding a little cleaning solution.
Immerse the sponge well in the mixture of mild detergent and water. This soapy water helps to effectively loosen stubborn dirt and stains.
This method is not only suitable for cleaning standard windows, but can also be applied to new windows. For new windows, which may be less dirty, you can possibly leave out the soapy water and simply wipe the surface with a damp sponge. You can then dry the window with a dry cloth.
Cleaning with a window squeegee
To clean a window with a window squeegee, follow these simple steps.
1: Start by wetting the window with a small mixture of mild detergent and water, for example applied with a spray. Make sure the window surface is evenly covered.
2: Next, take the window squeegee and place the rubber blade at the top of the window.
3: Pull the squeegee down in a straight line, wiping away the water and cleaner. Repeat this motion, wiping the squeegee with a cloth after each pass to absorb excess moisture and prevent streaks.
4: Continue pulling the squeegee until the entire window surface is clean and dry.
This process results in clear, streak-free windows, giving you a shiny, clean look. This simple process is not only suitable for regular windows, but can also be applied to caravan windows.
Now that you're already busy
Some additional tips:
1. Cleaning Greasy Windows:
For greasy windows, add a small amount of vinegar to your cleaning mixture. Vinegar helps degrease and leaves your windows sparkling. (note: vinegar cannot be used in a steam cleaner!)
2. Use an Onion for Streak-Free Windows:
Cut an onion in half and rub it over the windows. The natural juice of the onion will help prevent streaks and give your windows a bright shine.
3. Wash Windows in the Shade or in the Rain:
Avoid cleaning windows in direct sunlight as this can cause rapid drying and leave streaks. Preferably, you can do the job on a cloudy day or even in light rain.
4. Avoid green soap:
Avoid using green soap, as this soap can leave a greasy film, making windows look dull. Instead, opt for a mild detergent.
5. Wash Windows When It's Freezing:
Avoid cleaning windows in freezing weather as the water can freeze quickly and leave streaks. Choose a day with milder weather for more effective cleaning.
-
Cleaning Greasy Windows:
For greasy windows, add a small amount of vinegar to your cleaning mixture. Vinegar helps degrease and leaves your windows sparkling. (note: vinegar cannot be used in a steam cleaner!)
-
Use an Onion for Streak-Free Windows:
Cut an onion in half and rub it over the windows. The natural juice of the onion will help prevent streaks and give your windows a bright shine.
-
Wash the Windows in the Shade or in the Rain:
Avoid cleaning windows in direct sunlight as this can cause rapid drying and leave streaks. Preferably, you can do the job on a cloudy day or even in light rain.
-
Avoid green soap:
Avoid using green soap, as this soap can leave a greasy film, making windows look dull. Instead, opt for a mild detergent.
-
Wash the Windows When It's Freezing:
Avoid cleaning windows in freezing weather as the water can freeze quickly and leave streaks. Choose a day with milder weather for more effective cleaning.
Frequently Asked Questions
If your question is not listed here, please feel free to contact our team.
You can clean most windows with a steam cleaner, follow our step by step instructions to make cleaning as efficient as possible.
Yes, start by rinsing off any dirt, fill the steam cleaner, attach the accessories, make figure eight movements, and clean frames and stains.
Yes, the steam cleaner is versatile and suitable for mirrors and various glass surfaces. Adjust the steam power based on the sensitivity of the surface.
This varies, but we recommend cleaning your windows at least twice a year. Regular maintenance helps prevent dirt and keeps windows clear.